- Tru Counterbalance
When the lid/hood stays where you put it. In other words, it will not move after you position it at the desired angle.
This occurs when the lid torque is matched by spring torque and the friction envelope.
The spring provides the added benefit of offsetting heavy lid weight for fingertip control and feel.
- Spring Assist
Force provided to offset the heavy feel of a hood/lid. The lid will typically tend to coast open and/or coast closed from approximately the middle of it’s opening range.
- Coast Closed
Lid will tend to move toward the closed position because the lid torque is greater than the spring plus friction torque.
- Coast Open
Lid will tend to move toward the open position as a result of the lid torque being less than the spring minus friction torque.
- Soft Open / Soft Closed
Rate of final opening and/or closing controlled by use of a damper in conjunction with springs. Excess energy is absorbed to prevent sudden stop or slam.
The undesirable violent closing that creates noise, an abrupt stop and/or damage to the product or worse, injury, resulting in a negative user experience.
- Pop Up
A slight rise of a few degrees from the close position due to the spring torque being greater than the lid torque. This can be advantageous when a latch is used, as it creates a gap for opening the lid.
A device to absorb excess energy to reduce excess speed. It has a restraining or subduing effect to prevent slams.
Grills + Kitchens
Vectis Design Tool
Design Your Own
It's about the feel.
Soft Open & Soft-Close Options
Vectis counterbalance technology is enhanced with the addition of a damper action in both the open and/or closed position. Eliminate the concerns your clients have regarding heavy, cumbersome lids with better ergonomics!
Superior to Gas Cylinders
Our Vectis hinge technology eliminates the need for worrisome gas cylinders and helps in preventing failures and spoilage.
More Than a Hinge. An Experience.
Fine Tuned & Tailored OEM Solutions
Every Vectis counterbalance mechanism is custom designed to meet the needs of your specific application.
Incorporating Weber Knapp’s patented technology, each Vectis designed application leverages our engineers' decades of counterbalance experience.
What our clients say
“Weber Knapp does it again!
We challenged them to design another “Air Lift Hinge” for the Pro Joe™ that requires 50% more spring force than on the Big Joe™,
to make it in #8 mirror bright stainless steel finish, and do it all within ½ of their normal development time.
An “all hands on deck” attitude came together with Swiss watch precision to deliver prototypes and production on time and on budget.
Our product wouldn’t be what it is without them.”
“From the initial contact, through the entire design, prototype, testing and production process.”
“Weber Knapp was an extension of our engineering effort and an integral part of our successful launch. From that point on, we knew we had found what we were looking for.”
Have Questions? Need a Quote?
Let us address any of your motion control related technical challenges, from the simplest to the most complex.
We are hard at work to provide you with unsurpassed solutions that will wow your end-users every time.
Our team of engineers will be delighted to contact you to further discuss your needs.